EcoShield V2 SHW

Yes. The heat exchanger is now secured with two unions rather than the Press-Fit pipe and fittings used in the original version.

The appliance must be in the ON status:
• Press and hold the ENTER & UP buttons together
• The appliance should start up and a spanner icon should appear in the bottom left of the display. The appliance will run up to full rate.
• Press and hold the DOWN button. The fan speed will drop to minimum rate.
• To cycle between the maximum and minimum rates, use the UP & DOWN buttons.
To exit the service mode, press and hold the ENTER & UP buttons together when the fan speed is at maximum.

The correct LPG orifice is provided within the ICM instruction packaging. It is provided for field conversion by a competent Gas Safe operative.

Unfortunately, there is no 0-10v facility on these models.